Modular Encoder for Servo Motors ,Special, changable resolution encoder.
Resolution can be set, with the build-in 4 microswitches.
resolution of 48/2048 imp. / turn
5 volt
3 channels a/b/z
TTL
..
Brush DC servomotor controller.
Power: 80V and 20A.
Opto-isolated step/direction inputs.
Tuning through USB port.
RJ45 connector for PLUG&PLAY like easy connection.
Selectable 2x and 4x encoder logic.
Step signal multiplier with selectable 1x, 2x, 3x, 4x, 5x, 6x, 7x, 8x, 9x, 10..
Brush DC servomotor controller.
Power: 160V and 35A.
Opto-isolated step/direction inputs.
Tuning through USB port.
RJ45 connector for PLUG&PLAY like easy connection.
Selectable 2x and 4x encoder logic.
Step signal multiplier with selectable 1x, 2x, 3x, 4x, 5x, 6x, 7x, 8x, 9x, 1..
Same is with the braking circuit, it can be used when the user uses the DG2S-160-35 version drive with above 80Volts powersupply Voltage, he may use one braking circuit for a whole setup, for e.g. 3-4 or more drives which shares a common powersupply.
..
The differential line driver can be used to convert single ended to differential signals.
Our servo drives accepts only differential encoder inputs, therefor single ended encoder signals must be converted to differential before connecting them to our servo drives.
The Index pin is not u..
The USB programming stick (PRG01) is used to connect our DG4S servo drives to the host PC for configuration and for making diagnostics.
To connect the device to the PC use a standard USB A-B cable (not supplied with the device).
To connect the device to the DG4S servo drive, simply conn..
UC100 USB Motion controller
- Replaces the LPT port.
- Controls upto 6-axis simulteneously.
- Works with Mach3 software via plugin.
- Upto 100kHz operation.
- USB connection to the control PC.
- Same pinout as a standard LPT port.
- Fast communication with data buffer for robust a..